10000 LPH INDUSTRIAL REVERSE OSMOSIS
PLEASE NOTE!
When you consider purchasing this system, you need to know the following information as it is very important.
This system requires a pretreatment setup for it to perform like it was designed to.
Below, the sketch shows a basic pretreatment setup with the reverse osmosis system.
The above pretreatment setup is not guaranteed to work unless recommended by a sales agent according to the water analysis report from a lab.
A water analysis report is very important as it determines the pretreatment setup. As you can see in the sketch above, the pretreatment consists of a Sand/Glass Filter, Carbon Filter, and Antiscalant Dosing system.
Pretreatment setups can consist of even more items installed before the reverse osmosis system. Below is a list of items that could be required as per the water analysis report.
- Chlorine Dosing System
- Ultrafiltration System
- Dmi-65 Iron Removal Media Filter System
- Ozone Generator
- Flocculant System
Once all the equipment has been purchased, you will need a qualified technician to put together the complete setup. We have our own qualified technicians train by the manufacturers of the equipment to do the installation running of the setup. Should you require us to install the system for you, a quote with the installation fee will be sent to you by the sales agent in charge.
Training can also be offered to the guys you want to be the ones installing your setup instead of our technicians.
THE INDUSTRIAL REVERSE OSMOSIS SYSTEM
RO membrane water purifier uses semi-permeable spiral wound membranes to separate and remove dissolved solids, organic, sub-micron colloidal matter, and bacteria from water. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% of all bacteria in the feed water.
Reverse osmosis RO machine is very dense and has a very high removal rate for viruses, ions, phage, and bacteria, at least above 3log (removal rate >99.9%).
The benefit of the water treatment system
- Can produce pure water continuously and is highly automatic
- No chemical to regeneration, easy operation
- RO system uses imported USA DOW membrane
Description
| Capacity | 10T/60000GPD |
| Voltage | 220V/50Hz,220V/60Hz, Single phase |
| Recovery | 50%-70% |
| Desalination | 96%-99% |
| Membrane Qty | 5pcs |
| Temp of raw water | 1-45℃ |
| Feed Water Pressure | 1-5 bar |
| Raw water TDS | 0-1000ppm |
| Application raw water | Tap water, Brackish water, Seawater |
| Raw water pump: | CNP, Shimge |
| RO Membrane | Vontron, Dow |
The complete Plant Of A 10000LPH Industrial RO System
Flow Chart:
- Raw water pump
- Sand filter
- Carbon filter
- Antiscalant
- High-pressure pump
- RO system
| Item name | Material |
| Raw water pump | SS304 |
| The pipe of the raw water pump | PVC |
| FRP Tank | FRP |
| up and down water distributor | ABS |
| Pressure gauge | assembly |
| control valve | Engineering plastics |
| HP PUMP | SS304 |
| RO Membrane housing | FRP |
| Pure Flowmeter | Plexiglas Panel |
| waste Flowmeter | Plexiglas Panel |
| Conductivity meter | engineering plastics |
| Pressure switch | brass |
| inlet valve | brass |
| flush valve | brass |
| Regulating valve | brass |
| Electronic control system | air switch. electric relay. contractor. switch. LED |
| control box | SS304 /Mild Steel |
| Frame | SUS304 |
| pipeline | UPVC 3/4” |
The complete Plant Of A 10000LPH Industrial RO System Breakdown
Raw Water Pump
(Lyson Vertical Multistage Pump – CDL-6)
Basic Information
| Pump Casing Combined | Verticaljoint Surface Pump |
| Impeller | Closed |
| Material | Stainless Steel |
| Engine | Electric Motor |
| Transport Package | Wooden Crate |
| Origin | Shanghai, China |
| Position of Pump Shaft | Vertical Pump |
| Mounting Height | Suction Centrifugal |
| Usage | Pump |
| Color | Silver and Black |
| Trademark | LYSON |
| Specification | 120cmX100cmX60cm |
Main Uses
High-rise buildings, fire protection, refrigeration systems, and industrial, agricultural, hotel, Pumping water, and fresh water.
Detailed Use
- Water supply: Water filtration and distribution, water supply main pipe water area, the first increase in pressure, increased pressure of high-rise buildings.
- Industrial pressure: Industrial production water system, cleaning system, high-pressure washing system, fire protection system.
- Industrial liquid conveying: Cooling and air-conditioning system, boiler feed water and condensate systems, machine Matching, acidic and alkaline medium transport.
- The water treatment system, water treatment system, ultrafiltration system, reverse osmosis system distillation system, Separator, and swimming pool.
- Irrigation: Farmland irrigates, sprinkler irrigation, drip irrigation.
The transmission medium
- Non-flammable and explosive medium, thin, clean, containing no solid particles or fibers such as mineral water, softened water, pure water, thin sewage water, food oil, and other light industry media.
- Pump the main material for stainless steel, which can be used in pumping mildly corrosive media.
Product Overview
- The stainless steel stamping centrifugal pump uses technology manufactured in Denmark
- The hydraulic model is advanced, high in efficiency, and energy-saving. The pump internal leaf adopts stainless steel stamping, smooth flow, and avoids pollution two. Seal with wear-resistant mechanical seal, no leakage.
- Motor using Y2 lead shell, import bearings, insulation level class F.
- The pump running smoothly. Low noise, reliable quality, beautiful appearance, small size, lightweight, convenient installation, and operation, is an ideal green, environmental protection, energy-saving water pump.